LEEC Drying Cabinets
Originally designed for drying Pyrex laboratory glassware and stainless steel surgical instruments, LEEC drying cabinets can be used to dry pretty much anything that cannot be dried in a laboratory oven (lab ovens tend to dry at temperatures higher than +100°C). Drying cabinets can dry at up to a maximum of 50°C above room temperature. They can be used in pharmaceutical / cosmetic manufacturing, food testing industry, automotive and aerospace industries, and electronics (PCB) manufacturing, as well as science labs in schools, colleges and universities.
Main features:
- Dry glassware, surgical instruments, wigs / costumes, media, cycle gear, PCB’s
- Four sizes with hinged glass doors
- Two sizes with sliding glass doors
- 5mm thick, clear, toughened glass doors (BS EN 12150)
- Fan models available
LEEC drying cabinets are ideal for drying theatrical wigs and costumes and are popular with theatrical production companies, film / TV show producers. They are often referred to as “wig dryers” or a “wig dryer”. They can hold several head blocks.
LEEC drying cabinets are made from rust resistant steel which is finished in white polyester powder coat paint as standard. They have heatproof toughened glass doors to British Standards. The wire mesh shelves are removable and can be adjusted for height every 25mm. Heating elements are waterproof and are located underneath a perforated floor, which is finished in unpainted, polished stainless steel. Temperature control is by Simmerstat giving any desired temperature up to a maximum of 50°C above ambient temperature.
The standard “natural convection” drying cabinets are supplied with a sliding stainless steel shutter on top for ventilation. LEEC drying cabinets are also available with a circulation fan or extract fan. A circulating fan gives better drying performance. The air is drawn upwards through the body of the cabinet and returned via a full width air duct to the heaters in the base. Where an extractor fan for exhausting moisture to outside the building is fitted, the fan will be located in a chimney which adds approximately 200mm to the overall cabinet height and terminates in a 100mm diameter spigot.
Note: The FCX1 model is a combined circulating / extractor system. A butterfly valve system adjusts the proportion of air circulated or exhausted by a single, more powerful fan unit.
SPECIFICATION | |||||||
Model  |
Fan system  |
External mm (H x W x D) |
Internal mm (H x W x D)Â |
Capacity (Litres) |
Weight (kg) |
Shelves  |
Electrical Loading (W) |
 F1 FC1 FX1 FCX1 |
N/A Circulating Extract Circ. / Extract |
1626 x 1168 x 610 1726 x 1168 x 610 1826 x 1168 x 610 1800 x 1168 x 610 |
1626 x 1168 x 610 1626 x 1168 x 610 1626 x 1168 x 610 1626 x 1168 x 610 |
1000 1000 1000 1000 |
125
|
4 4 4 4 |
2500 2500 2500 2500 |
 F2 FC2 FX2 |
N/A Circulating Extract
|
1626 x 635 x 610 1726 x 635 x 610 1826 x 635 x 610 |
1430 x 630 x 590 1430 x 630 x 590 1430 x 630 x 590 |
540 540 540 |
75
|
4 4 4 |
1500 1500 1500 |
B1 BC1 BX1 |
N/A Circulating Extract |
864 x 1168 x 610 964 x 1168 x 610 1064 x 1168 x 610 |
685 x 1165 x 610 685 x 1165 x 610 685 x 1165 x 610 |
480 480 480 |
63 |
1 1 1 |
1500 1500 1500 |
B2 BC2 BX2 |
N/A Circulating Extract |
864 x 635 x 610 964 x 635 x 610 1064 x 634 x 610 |
685 x 630 x 590 685 x 630 x 590 685 x 630 x 590 |
255 255 255 |
45
|
1 1 1 |
1000 1000 1000 |
LS | N/A | 630 x 1000 x 410 | 530 x 990 x 390 | 226 | 36 |
3 |
750 |
SS | N/A | 530 x 760 x 360 | 430 x 750 x 340 | 113 | 22 | 3 | 500 |
Electrical supply: all models 220/240v, 50Hz.      Glass doors excluded from guarantee. |