LEEC P33 Standard incubator
A large capacity incubator that is ideal for users who want to store a large amount of temperature sensitive resources. The P33 is equipped with lockable castors which means it can be moved easily to another location if needed.
Main features:
- Large storage capacity
- Ideal for use at 37.0°C
- Microprocessor temperature controller
- Stainless steel chamber and shelves
- Inner glass doors
The LEEC P33 Precision Incubator combines traditional styling and modern controls for precise temperature control in a large, 730-litre capacity stainless steel chamber.
This incubator has adjustable stainless-steel shelves and 4 toughened glass viewing doors. The outer cabinet is rust-resistant and finished in white polyester powder coat paint with anti-microbial properties. Two 12mm access ports are provided so that cables for shakers and/or monitoring probes can be passed safely into the incubator.
The heating system consists of low wattage electrical elements specially designed and profiled to eliminate hot spots around the chamber. Expanding polyurethane insulation is foamed in-situ to give excellent thermal retention which ensures optimum temperature control and stability. This unit is a heat-only incubator.
Please note that operation of the incubator at (or below) room temperature requires a source of chilled water (such as the LEEC self-contained recirculating cooler unit) and that all LEEC Precision Incubators (regardless of their age) can cool when connected to a LEEC Self Contained Recirculating Cooler Unit.
This incubator has gentle fan-assisted air circulation via a full-width duct to ensure optimum temperature stability throughout the chamber and when the incubator door is opened, both fans stop so that any heat loss is kept to a minimum. The microprocessor PID temperature controller maintains the set temperature to within 0.1°C and the temperature controller shows both ‘set’ and ‘measured’ values with indicators showing when the heater is active.
An independent digital over-temperature safety cut out system is included as standard. This protects the items being incubated inside the chamber from accidental over-temperature situations. The cut-out limit can be easily adjusted by the end-user.
