Incubators

Labcold Incubators

Labcold Incubator 88L RLCG0100

LABCOLD Cooled Incubators have controlled cooling and heating allowing you to choose an operating temperature between +5°C and 40°C unlike normal incubators which can only operate from several degrees above room temperature.

Key features:

  • Digital temperature display
  • Stainless steel interior
  • Adjustable shelving

Labcold Incubator 150L RLSD01502 / RLCG01502

LABCOLD Cooled Incubators have controlled cooling and heating allowing you to choose an operating temperature between +5°C and 40°C unlike normal incubators which can only operate from several degrees above room temperature.

Key features:

  • Glass door or solid door variants
  • Overall temperature variation: better than ±0.5ºC at 4ºC and ±1ºC at 20ºC
  • Stainless steel interior

Labcold Cooled Incubator 300L RLCG0300 / RLSD0300

This 300 litre cooled incubator is ideal for microbiology or any application where precise and consistent temperatures at or below room temperatures are required.

Key features:

  • Microprocessor controlled temperature regulation
  • Temperature uniformity: better than ±0.5ºC at 4ºC and ±1ºC at 20ºC
  • Glass door or solid door variants

Labcold Cooled Incubator 570L RLSD0600 / RLCG0600

This 570 litre cooled incubator is ideal for microbiology or any application where precise and consistent temperatures at or below room temperatures are required.

Key features:

  • Digital temperature display
  • Microprocessor controlled temperature regulation
  • Glass door or solid door variants

LEEC Incubators

LEEC Classic Incubators C100 - C157 - C330

LEEC Classic Incubators have fully sealed chambers manufactured from polished stainless steel with rounded corners for easy cleaning. The outer cabinet is manufactured from stainless steel, and has a tough powder coat paint finish. This gives the incubator exceptional corrosion resistance. An inner glass viewing door closes positively onto a silicone gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the incubator chamber.

Key features:

  • High Performance Insulation
  • Multiple sizes available
  • Easy cleaning

LEEC CO2 Incubators GA2000 - GA3000 Research Incubators

LEEC Research and standard CO2 incubators set advanced standards in performance and freedom from contamination. The two Research models have the added benefit of a high temperature decontamination facility (95°C).

Key features:

  • Advanced microprocessor control
  • Infrared CO2 sensor
  • Fan assisted chamber for precise culturing conditions

LEEC CO2 Incubator P50 - Mini Culture Incubator

The new LEEC Culture Safe CO2 precision incubator has a fully sealed, electro-polished, one-piece, deep drawn chamber, manufactured from the high grade 304 stainless steel. The outer cabinet is manufactured from stainless steel, and has an anti-bacterial powder coat paint finish. This gives the CO2 incubator exceptional corrosion and contamination resistance. An inner glass viewing door closes positively onto an inert (no VOC’s) gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A side access port allows temperature monitoring probes to be inserted safely into the CO2 incubator chamber.

Key features:

  • Small footprint
  • 6 sided direct heating system
  • 2 years warranty

LEEC CO2 Incubators P190 - P190D - Culture Safe

The new LEEC Culture Safe Precision CO2 incubators have a fully sealed, electro-polished, one-piece, deep drawn chamber, manufactured from the high grade 304 stainless steel. The outer cabinet is manufactured from stainless steel, and has an anti-bacterial powder coat paint finish. This gives the CO2 incubator exceptional corrosion and contamination resistance. An inner glass viewing door closes positively onto an inert (no VOC’s) gasket and allows a clear view of the chamber contents without disturbing the internal atmosphere. The outer door has a magnetic gasket providing a good seal. A rear access port allows temperature monitoring probes to be inserted safely into the CO2 incubator chamber.

Key features:

  • Market leading 160°C decontamination option (P190D)
  • 190 litre chamber capacity
  • No internal fan (less risk of contamination)

LEEC CO2 Incubators Touch T50 - T50S

LEEC mini Culture Safe Touch CO2 incubators are the perfect solution for laboratory users who want a high quality, fully featured premium bench top mini CO2 incubator, in a small package.

Key features:

  • World’s first 200°C sterilisation (T50S)
  • 50 Litre Capacity
  • Touch screen controller

LEEC CO2 Incubators Touch T190 - T190S

The LEEC IR CO2 sensor offers the latest technology and is completely drift free. T.C. CO2 sensors only measure accurately at the desired 88-92% relative humidity (%RH). After the inner glass door is opened the T.C. sensor is measuring inaccurately up to a period of 1 hour after the door closure. TC technology is much older technology and its huge disadvantage is that accurate % CO2 can only be achieved once the relative humidity (%RH) has recovered back to 88-92%RH, which is typically up to 1 hour. For very important samples and cell lines this is simply not acceptable. The pH level of the culture media will not recover and cell desiccation may result as a consequence.

Key features:

  • 200°C sterilisation (Touch 190S)
  • Infrared CO2 sensor (drift free)
  • Multi Gas / Low Oxygen version available

LEEC Drying Cabinets

Originally designed for drying Pyrex laboratory glassware and stainless steel surgical instruments, LEEC drying cabinets can be used to dry pretty much anything that cannot be dried in a laboratory oven (lab ovens tend to dry at temperatures higher than +100°C). Drying cabinets can dry at up to a maximum of 50°C above room temperature. They can be used in pharmaceutical / cosmetic manufacturing, food testing industry, automotive and aerospace industries, and electronics (PCB) manufacturing, as well as science labs in schools, colleges and universities.

Key features:

  • Dry glassware, surgical instruments, wigs / costumes, media, cycle gear, PCB’s
  • Four sizes with hinged glass doors
  • 5mm thick, clear, toughened glass doors (BS EN 12150)

NUVE Incubators

NUVE EC 160 CO2 Incubator

With its clean chamber conception of rounded corners, no crevices (even in the racking system) for contaminants to hide and with gentle air circulation, the EC 160 is designed to resist contamination and protect your valuable cultures. Fast temperature recovery, without any overshoot continues this substantial protection.

Key features:

  • Chamber Volume: 160 liters
  • Temperature range: Ambient Temperature +7°C to 50°C
  • Air jacketed heating system

NUVE EN 055/120 Incubators

Excellent incubation conditions are provided by this series of EN incubators for applications in biology and microbiology laboratories such as medical and veterinary fields; research and quality control examinations in pharmaceutical, food and cosmetics industries and biotechnology.

Key features:

  • Two different sizes: 055 and 120 liters
  • Temperature range: Ambient Temperature +5°C / 99,9°C
  • Easy programming with one button, just turn and push

NUVE EN 300/400/500 Incubators

With dimensions favouring labs with limited bench space where wall-mounting of shallower incubators would be an advantage, EN 300, EN 400 and EN 500 incubators are regular units for customers looking for economical incubators.

Key features:

  • Three different sizes: 22, 44 and 120 liters
  • Temperature range: Ambient Temperature +5°C / 80°C
  • Anodic-oxidated aluminum chamber

NUVE ES 120/252 Cooled Incubators

Ideal design for freezing, incubation, drying, different types of tests and long storage in the fields of biology, zoology, botany and the quality control and R&D laboratories in industries such as pharmaceutical, food and cosmetics.

Key features:

  • Two different sizes: 120 and 252 liters
  • Temperature range: -10°C / 60°C
  • High density injected polyurethane insulation